Logistics · Portfolio project 09

Cargo Elevator & Hoist Kit

Modular Goods-Lift Shafts, Lift Cars, Landing Gates, Monorail Runways & Hoists

Build goods lifts storey by storey and monorail hoists bay by bay: shaft segments that stack with their guide rails lined up, cars and gates on their own ports, runway sections that hang from their supports and carry trolleys and hoists.

Assets
20 · 8 functional types
Formats
GLB · FBX · .blend · Unity 6
Tested in
Unity 6000.6 (Built-in, URP) · Blender 5.0
Version
1.0.0 · 97 release checks passed

Blender renders of the kit's demo layouts. Walls, floors and plain context blocks in the images are scene dressing for the demos.

What was built

Goods lifts and overhead hoists for games: open steel lift-shaft segments that stack storey by storey (ground landing with the car pit floor, upper landing, blind segment, machine head with the hoisting machine), a platform car and a cage car, bifold and rising landing gates, I-beam monorail runway sections with end stops, a cantilever column and a portal support, push and geared beam trolleys, a manual chain block and an electric chain hoist, a lift controller, a call post and a lifting beam. Every shaft joint, car, gate, runway joint, trolley and hoist is a checked port — PBR materials and game-ready exports.

Where it is useful

Goods lifts between storeys and monorail hoist bays for factories, mines, warehouses and vertical level design.

Demo layouts

Two demo scenes — goods lifts (two shafts placed from their ground segments only: a three-storey shaft with the platform car and a four-storey shaft with a blind storey and the cage car, a landing gate on every landing, a controller and a call post) and a hoist bay (a monorail of two straight sections, a short section and two end stops placed from one column, a portal hung from the runway, a push trolley with a chain block, a geared trolley with an electric hoist and a lifting beam) — are included as a Blender file and as placement lists (Blender and Unity transforms) and as Unity scenes. The ground, mezzanine slabs and their columns in the images are demo context and are not included.

Port standard

  • Shaft segments: 2.4 × 2.4 m on a 3.0 m storey with one section — the four corner posts and the two car guide rails — so any number of landing and blind segments stack between the ground segment and the machine head.
  • Car and gates: the car parks on the ground segment's pit floor with its deck level with the landing sill; gates stand on the landing sills.
  • Runway: straight, short and end-stop sections share one I-beam section; sections hang from a column's or a portal's hanger plate.
  • Trolleys and hoists: a trolley's load bar mates under a runway section with its wheels just above the bottom flange; a hoist hangs from the trolley's hook eye.
  • Every port (position, direction, up axis, family, role) is listed in asset_manifest.json and in PortStandard.md; Unity prefabs carry PORT_ marker objects and an editor snap command.
  • The demo scenes were assembled from the exported files using only that port data and checked: 21 joints coincide exactly and touch, no unintended overlaps; each shaft is placed from its ground segment, and the portal hung from the runway lands with its feet on the floor.

Contents

What's in the kit (20 assets, 8 functional types)

  • Shaft BaseGround shaft segment, 2.4 × 2.4 × 3.0 m: four yellow corner posts on base plates, two car guide rails, girts, mesh cladding on three sides, a 1.8 × 2.2 m landing opening with jambs, header and a steel sill, and the concrete pit floor the car parks on.
  • Shaft LandingUpper landing segment, 2.4 × 2.4 × 3.0 m: corner posts, guide rails, girts, mesh cladding on three sides, a landing opening with jambs, header, steel sill and toe guard.
  • Shaft BlindBlind shaft segment, 2.4 × 2.4 × 3.0 m: corner posts, guide rails, girts and mesh cladding on all four sides (a storey without a landing).
  • Shaft HeadMachine head, 2.4 × 2.4 × 1.6 m: corner posts, guide rail ends, a machine beam with a diverter sheave, a roof deck with the hoisting machine (motor, gearbox, drum, bearing stand) and a drive cabinet.
  • Car PlatformOpen platform car, 1.84 × 2.14 m: chequer-plate deck with a striped edge, side and back rails with toe boards, a sling with guide shoes and a crosshead, and a car operating panel (no text).
  • Car CageEnclosed cage car, 1.84 × 2.14 m: mesh walls and roof on a grey frame, a striped door head, a ceiling light, a sling with guide shoes and a crosshead, and a car operating panel (no text).
  • Gate BifoldBifold landing gate, 1.8 × 2.04 m: top and bottom tracks, side posts and four mesh leaves with hinges, a latch handle and a striped bar.
  • Gate RisingVertical-rising landing gate, 1.8 × 2.49 m: guide channels, a mesh panel, a crossbar with two pulleys, a counterweight box and a lift handle.
  • Rail StraightMonorail runway section, 3.0 m I-beam (0.2 m deep, 0.1 m flange).
  • Rail ShortMonorail runway section, 1.5 m I-beam (0.2 m deep, 0.1 m flange).
  • Rail EndStopRunway end stop: a 0.4 m I-beam stub with a striped end plate and a rubber buffer.
  • Support ColumnCantilever runway column, 4.5 m: base plate with anchor bolts, column, arm with a knee brace and the hanger plate, and an isolator box.
  • Support PortalTwo-leg runway portal, 3.5 m wide: legs on base plates, a cross beam with knee braces and the hanger plate at the centre.
  • Trolley PushPush beam trolley: side plates, four wheels riding on the bottom flange, a load bar and a hook-eye plate.
  • Trolley GearedGeared beam trolley: side plates, four wheels, a load bar, a hook-eye plate, a gear cover and a hand chain wheel with a hanging hand-chain loop.
  • Hoist ChainManual chain block: suspension plate, yellow body, hand chain wheel with a hand-chain loop, load chain, hook block and bottom hook.
  • Hoist ElectricElectric chain hoist: suspension plate, blue motor body with a motor end cap, control box, chain bag, load chain, hook block, bottom hook and a pendant on its cable (no text).
  • Equip ControllerLift controller cabinet on a plinth: double doors with handles, an isolator, three status lamps and vent slots (no text).
  • Equip CallPostLanding call post: base plate, yellow post and a call / send station with two buttons and a stop bar (no text).
  • Equip LiftingBeamLifting (spreader) beam, 2.4 m: I-beam with a centre lug and two end shackles, resting on two timber trestles.

Technical details

Formats and specifications

  • Formats: GLB (glTF 2.0, embedded PBR textures), FBX, Blender 5.0 .blend, Unity 6 package (Built-in + URP)
  • Real-world scale in metres
  • 44 – 1,288 triangles per asset (9,288 for all 20)
  • PBR textures 512 – 4096 px: BaseColor, Normal (OpenGL), ORM, Unity-style MetallicSmoothness, Emission for displays and lamps
  • Collision: 56 simple box colliders as UCX_ meshes in FBX and separate collision GLBs
  • Validated: Khronos glTF validator 0 errors / 0 warnings; Blender re-import of every format with textures

Compatibility

Tested engines and known limits

  • Blender: tested (native files; GLB/FBX re-import with textures).
  • Unity 6: tested in Unity 6000.6.5f1 (Built-in Render Pipeline and URP 17.6.0) — prefabs with convex MeshColliders and PORT_ markers, the two demo scenes, every demo joint re-checked in Unity (Built-in 58/58, URP 58/58 port checks), the port snap helper, and CharacterController walks through the scenes (Built-in 5/5, URP 5/5).
  • Unreal Engine, Godot, HDRP and other engines: not tested. GLB and FBX are standard formats and the FBX files carry Unreal-style UCX_ collision meshes, but no engine-specific setup is provided.

Known limitations

  • Static meshes and colliders only: the car is parked at the ground landing, gates are closed, trolleys and hoists do not travel; no ropes between the machine and the car.
  • One shaft size, one car size and one runway section (straight runs); mesh cladding is a flat panel. No LODs.
  • Plausible proportions for games and visualisation — not designed or tested to any lift, hoist, crane or safety standard and carries no load, capacity, speed or other ratings. Panels carry no text.

Need a kit like this built to your spec?

We can extend the Cargo Elevator & Hoist Kit standards with new pieces, or build a new kit for your setting, scale and engine.

More projects

Dock Front demo layout, atmospheric lighting

Warehouse Loading Dock Kit

Build the truck side of a warehouse: dock bays that join on a 4.5 m pitch, levellers that drop into their pits, and seals, shelters, bumpers, lights and restraints that snap onto their own mounts.

Logistics 19 assets
Maintenance corridor demo layout, atmospheric lighting

Utility Corridor Kit

Straight runs, turns, junctions and dead ends from one small set of pieces on a 3 m grid.

Structures 21 assets